3com S7906E Guide De Référence
1-9
Default Level
1: Monitor level
Parameters
ipv6-address: IPv6 address whose neighbor information is to be displayed.
all: Displays information of all neighbors, including neighbors acquired dynamically and configured
statically.
dynamic: Displays information of all neighbors acquired dynamically.
static: Displays information of all neighbors configured statically.
slot slot-number: Displays information of the neighbors of a specified slot.
interface interface-type interface-number: Displays information of the neighbors of a specified
interface.
vlan vlan-id: Displays information of the neighbors of a specified VLAN whose ID ranges from 1 to
4094.
|: Uses a regular expression to match neighbor entries. For detailed information about regular
expression, refer to CLI display in Basic System Configuration in the System Volume.
begin: Displays a specific neighbor entry and all the neighbor entries following it. The specific neighbor
entry must match the specified regular expression.
exclude: Displays the neighbor entries not matching the specified regular expression.
include: Displays the neighbor entries matching the specified regular expression.
regular-expression: A case-sensitive string of 1 to 256 characters.
Description
Use the display ipv6 neighbors command to display neighbor information.
Examples
# Display all neighbor information.
<Sysname> display ipv6 neighbors all
Type: S-Static D-Dynamic
IPv6 Address
Link-layer
VID Interface State T
Age
FE80::200:5EFF:FE32:B800 0000-5e32-b800 N/A
GE2/0/1 REACH S
-
Table 1-7 display ipv6 neighbors command output description
Field
Description
IPv6 Address
IPv6 address of a neighbor
Link-layer
Link layer address (MAC address of a neighbor)
VID
VLAN to which the interface connected with a neighbor belongs
Interface
Interface connected with a neighbor