3com S7906E Guide De Référence

 

1-5 

sflow sampling-mode { determine | random } 

Interface view 

2: System level 

determine: Indicates to sample a fixed number of packets. 

random: Indicates to sample packets randomly. 

Use the sflow sampling-mode command to specify the packet sampling mode. 

Use the undo sflow sampling-mode command to restore the default. 

By default, the packet sampling mode is random. 

Note that this command should be used after sFlow is enabled on the current port. 

 

Currently, the determine mode is not supported on S7900E series Ethernet switches. 

 

# Specify the sFlow sampling mode as random on GigabitEthernet 2/0/1. 

<Sysname> system-view 

[Sysname] interface GigabitEthernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] sflow enable inbound 

[Sysname-GigabitEthernet2/0/1] sflow sampling-mode random 

sflow sampling-rate rate 

Interface view