3com S7906E Guide De Référence

 

1-18 

2: System level 

md5: MD5 authentication mode. 

rfc2453: Uses the message format defined in RFC 2453 (IETF standard). 

rfc2082: Uses the message format defined in RFC 2082. 

key-id: MD5 key number, in the range of 1 to 255. 

key-string: MD5 key string with 1 to 16 characters in plain text format, or 1 to 24 characters in cipher text 

format. When the display current-configuration command is used to display system information, a 

24-character cipher string is displayed as the MD5 key string. 

simple: Plain text authentication mode. 

password: Plain text authentication string with 1 to 16 characters. 

Use the rip authentication-mode command to configure RIPv2 authentication mode and parameters. 

Use the undo rip authentication-mode command to cancel authentication.  

Note that the key string you configured can overwrite the old one if there is any. 

Related commands: rip version. 

# Configure MD5 authentication on VLAN-interface 10 with the key string being rose in the format 

defined in RFC 2453. 

<Sysname> system-view 

[Sysname] interface vlan-interface 10 

[Sysname-Vlan-interface10] rip version 2 

[Sysname-Vlan-interface10] rip authentication-mode md5 rfc2453 rose 

rip default-route { { only | originate } [ cost cost ] | no-originate } 

Interface view 

2: System level  

only: Advertises only a default route.  

originate: Advertises a default route and other routes.  

no-originate: Advertises routes other than a default route.