Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-4 
authentication-mode 
Syntax 
authentication-mode { simple | md5 } 
undo authentication-mode 
View 
OSPF area view 
Default Level 
2: System level 
Parameters 
simple: Specifies the simple authentication mode. 
md5: Specifies the MD5 ciphertext authentication mode. 
Description 
Use the authentication-mode command to specify an authentication mode for the OSPF area. 
Use the undo authentication-mode command to remove the authentication mode. 
By default, no authentication mode is configured for an OSPF area. 
Routers that reside in the same area must have the same authentication mode: non-authentication, 
simple, or MD5. 
Related commands: ospf authentication-mode. 
Examples 
# Configure OSPF area 0 to use the MD5 ciphertext authentication mode. 
<Sysname> system-view 
[Sysname] ospf 100 
[Sysname-ospf-100] area 0 
[Sysname-ospf-100-area-0.0.0.0] authentication-mode md5 
bandwidth-reference (OSPF view) 
Syntax 
bandwidth-reference value 
undo bandwidth-reference 
View 
OSPF view 
Default Level 
2: System level 
Parameters 
value: Bandwidth reference value for link cost calculation, in the range 1 to 2147483648 Mbps.