3com S7906E Guide De Référence

 

1-15 

Ethernet interface view 

2: System level 

None 

Use the flow-control command to enable flow control on an Ethernet interface. 

Use the undo flow-control command to disable flow control on an Ethernet interface. 

By default, flow control on an Ethernet interface is disabled. 

 

The flow control function takes effect on the local Ethernet interface only when it is enabled on both the 

local and peer devices. 

 

# Enable flow control on interface Ethernet 2/0/1. 

<Sysname> system-view 

[Sysname] interface ethernet 2/0/1 

[Sysname-Ethernet2/0/1] flow-control 

flow-interval interval 

undo flow-interval 

Layer 2 Ethernet interface view 

2: System level 

interval: Time interval at which interface statistics are collected, in the range of 5 to 300 seconds, a 

multiple of 5. The default value is 300 seconds. 

Use the flow-interval command to configure the time interval for collecting interface statistics.