3com S7906E Guide D’Installation Rapide
6-2
RAMLine.....OK
System is booting...........***.....
******************************************
* *
* 3Com S7900E BOOTROM, Version 206 *
* *
******************************************
Copyright(c) 2004-2008 3Com.
Creation date : Apr 11 2008, 10:15:28
CPU type : BCM1125H
CPU Clock Speed : 600Mhz
BUS Clock Speed : 66Mhz
BOOT_FLASH type : M29W040B
Flash Size : 64MB
Memory Size : 512MB
Main board slot 0 self testing............................
SDRAM Data lines selftest.................................OK!
SDRAM Address lines selftest..............................OK!
SDRAM fast selftest.......................................OK!
CPLD selftest.............................................OK!
FPGA selftest.............................................OK!
The switch Mac address is .....................0000.FC00.7906
The above information may vary slightly with the models of S7900E series.
Press Ctrl+B to enter Boot Menu... 5
Press Ctrl+B. The system prompts you to input the Boot ROM password:
Password :
To enter the boot menu, press Ctrl+B within 5 seconds after “Press Ctrl+B to enter Boot Menu...” is
prompted. Otherwise, the system will start executing the host software decompression, and in this case,
if you want to enter the boot menu, you have to reboot the switch.
Enter the correct Boot ROM password and the system displays the boot menu.