3com S7906E Guide D’Installation Rapide

6-4

3. Set XMODEM protocol parameter

0. Return to boot menu

Enter your choice(0-3): 1

Load File name:

Switch IP address:

Server IP address:

5) Input the TFTP parameter values and press Enter. The system displays the following information

for confirmation:

Are you sure you want to download file to flash? Yes or No(Y/N)

Enter Y to download the file, or N to return to the download protocol menu.

6) Type

Y and press Enter. The system starts program downloading and upon its completion

automatically starts to write the program to the Flash. The system displays the following

information upon the completion of the downloading process:

Attached TCP/IP interface to sbe1.

Attaching network interf

Prepare for loading...OK!

Loading...................................................................

..........................................................................

.......................done!

Free flash Space : 65932288 bytes

Writing flash.....................................................................

..........................................................................

.....................................................................done!

1. Set TFTP protocol parameter

2. Set FTP protocol parameter

3. Set XMODEM protocol parameter

0. Return to boot menu

Enter your choice(0-3):

After the above steps, you have completed the downloading of the host software package.

To complete the host software upgrade, you need to set the main/backup attribute of the host software.

” on page

If you need to upgrade the Boot ROM on the SRPUs through the boot menu, refer to section “

” on page