Keurig B50 Mode D'Emploi

If you need to stop the brewing after the
process has started, press the Power Button to
turn the Brewer ‘OFF’. The flow of coffee 
or tea will stop, the heating element will shut
off and the green light illuminating the Power
Button will disappear.

The LCD Control Center of your Brewer will
indicate when the water level in the tank is low
or if the Water Reservoir has been removed by
displaying the words ‘ADD WATER’. The
Brewer will not allow you to brew when ‘ADD
WATER’ is displayed.

The Water Reservoir can be filled in two ways. 

1. Lift off the Water Reservoir Lid and pour 

water directly into the Water Reservoir 
while it is still attached to the Brewer, then 
replace the Lid.

2. Remove the Water Reservoir from Brewer

by first removing Lid from Reservoir, then
lifting Reservoir straight up and away from
Brewer. Fill with water. Place the Water
Reservoir back on the Brewer and replace
the Lid.

Your Brewer is able to produce a cup of hot
water for making hot chocolate, for use in
cooking, for making soups, etc. Simply raise
and lower the handle on the Brewer without
adding a K-Cup

®

portion pack. The LCD

Control Center will display 'READY' and the
Small and Large Cup Icons will blink. Be sure
to have a mug or cup on the Drip Tray and
then select the size you would like.

If your Brewer has not been used for more
than one week, you should purge the water
from the inner tank.

1. If there is water in the Water Reservoir,

remove the Lid, then lift Reservoir straight
up and away from Brewer. Discard water,
rinse and refill with water. Place the Water
Reservoir back on the Brewer and replace
the Lid.  (If there is no water in Reservoir,
simply refill.)

2. Be sure the Brewer is turned on. Raise and

lower the handle on the Brewer without
inserting a K-Cup.

3. The LCD Control Center will display ‘READY’

and the Small and Large Cup Icons will
blink. Be sure to have a mug on the Drip
Tray and then select the larger size brew.

4. Repeat steps 2 and 3 two more times to

completely purge water from inner tank.

Setting the clock is optional. When the clock is
set, the time will appear in the LCD Control
Center. NOTE: You must set the clock if you
will be using the Auto On/Off Time program-
ming feature.

a.  Press the button below 'MENU'.

b.  The word 'OFF' will appear at the top of the

LCD Control Center to indicate that the
clock is not set. The words 'SET CLOCK',
'SET AUTO OFF' and 'SET ON  TIME' will
appear in the LCD Control Center with an
arrow pointing to 'SET CLOCK'. H (Hour)
and M (Minute) will appear and blink.

c.  Press or hold the black button under the

blinking H until you have reached the
appropriate hour. If the hour has passed
12, the indicator switches from AM to PM
on the LCD.

d.  Press or hold the black button under the

blinking M to set the minutes.

e.  When you have reached the correct time,

press the menu button four times to scroll
through the remaining programming
options and return to 'READY' mode.

f.  The correct time should now be displayed

in the LCD Control Center.

The Brewer provides three modes so that you
can enjoy gourmet coffee or tea on your own
schedule. By programming your Brewer to
turn on each morning, you will never have to
wait for the Brewer to warm up to brew a 
gourmet cup of coffee.

The Brewer can be left on all the time so
that it is always ready to brew a fresh cup
of gourmet coffee or tea. To turn the
Brewer off at any time, simply press the
Power Button. (Note: Although the clock
remains on if set, you can not brew a cup
of coffee or tea.) Press the Power Button
again to restore power to the Brewer. You
will have to wait for the water to heat up
before the Brewer is ready to brew.

a. Press the MENU button twice to program

the AUTO OFF feature. The LCD Control
Center will now display 'SET AUTO OFF' 
with a small arrow next to it.

b. Press and release the H Button to 

advance 1 hour at a time, up to 9 hours. 

c. After setting the desired AUTO-OFF time,

press the MENU button three times to 
scroll through the remaining program
ming options and return to 'READY' 
mode. 'AUTO OFF' will now be displayed 
to indicate that it has been set.

NOTE: You may get less coffee or tea in 

your cup during your next brew. We 
recommend that you perform a cleansing
brew with water only after a terminated brew.
Then your NEXT brew will be the volume 
you have selected.

IMPORTANT: Do not remove the Water
Reservoir during the brewing process.

NOTE: If power is interrupted to the 
Brewer by unplugging it, or if power is lost,
follow the procedure above to reset the
time as the clock will not be visible until 
the time is set.

Á

Á