Avaya 9630 Mode D'Emploi

Features and Operations

3-14

Issue 1 May 1999

Lock Operation

NOTE:

You cannot lock a WT whenever the WT is active on a call or has a call on
hold.

If you have previously created a password, you can lock the terminal.

To lock the WT, do the following:

1. From the calling screen, press

2. Press

. If the WT is not active on a call or does not have a call on

hold, a screen for locking the terminal is displayed.

3. Enter the lock password in the space provided. For each digit that you

enter, an asterisk (*) appears in the display. If necessary, to erase up to the
first three digits you enter, press the Clear soft key and start again.

4. If the password you enter is correct, a screen indicating that the terminal is

now locked and the lock icon are displayed. If the password is incorrect, a
message to this effect is displayed and you are taken back to the lock
password screen in Step 3.

Changing the Password

To change your lock password, do the following:

1. From the calling screen, press

2. Press .

3. Press the Change soft key to change the password. A screen that allows

you to change your lock password is displayed.

Enter your old lock password in the space provided. For each digit that you
enter, an asterisk (*) appears in the display. If necessary, to erase up to the
first three digits you enter, press the Clear soft key and start again.

NOTE:

If you do not enter the correct password, an error message is
displayed, and you are returned to the screen discussed at the
beginning of this step.

Let’s assume that you enter the correct password. A screen that allows you
to enter your new lock password appears. Enter your new password in the
space provided. For each digit that you enter, an asterisk (*) appears in the
display. If necessary, to erase up to the first three digits you enter, press the
Clear soft key and start again.

Once you enter the password, a screen that requires you to reenter the
password for verification is displayed.