Avaya 9630 Mode D'Emploi

Operating the 9630 Series WT

Issue 1 May 1999

3-15

4. Reenter the password for verification. If the passwords match, a screen

indicating that your new lock password is now active is displayed. If the
passwords do not match, you are taken back to the lock password creation
screen in Step 4.

5. Press either

or the Exit soft key to return to the calling screen.

Deleting the Password

To delete your lock password, do the following:

1. From the calling screen, press

2. Press .

3. Press the Del soft key. A screen that allows you to delete your password is

displayed.

4. Enter the password to be deleted in the space provided. If you enter a valid

password, a screen indicating that the password has been deleted is
displayed. If you do not enter a valid password, a message to this effect is
displayed, and you are taken back to the screen with the Del soft key in
Step 3.

5. Press either

or the Exit soft key to return to the calling screen.

Unlock Operation

If a WT is locked and linked to the system, a padlock icon appears in the display.

To unlock your WT, do the following:

1. From the calling screen, press any key.

2. Enter your (un)lock password in the space provided. If you enter the correct

password, your terminal is unlocked and the lock icon disappears from the
display. If you enter an incorrect password, a message to this effect is
displayed, and you are taken back to the unlock screen.

NOTE:

If you cannot unlock the terminal, see your system administrator to reset the
password.

Redialing Calls

Press

to redial the last number dialed from the keypad. The redial

number is indicated on the display. You need not press

. The WT stores

up to the first 24 digits dialed. To redial a call, the WT must have an idle call
appearance.

Redial

On/Off