Epson 1000 Guide De Référence

To verify that you installed the PCL5/RITech upgrade board

properly, use the SelecType Level 1 EMULATION option.

Enter SelecType Level 1 and choose the EMULATION option.

Press   or   to see if 3/P/Si appears on the display. If it does

not, turn off the printer and reinstall the PCL5/RITech board.

If you are having difficulty printing complex, graphics-

intensive pages or if you regularly use downloaded fonts, you

may need to install the optional memory (RAM) chip sets on

your printer’s controller board. Your printer’s controller board

comes with either 0.5MB RAM installed (for the ActionLaser

1000) or 1.0MB RAM installed (for ActionLaser 1500). Two

types of RAM chip sets are available.

0.5 MB RAM Chip Set

Each set contains four 256 Kbit x 480 ns DRAM 20-pin DIP

chips

2.0 MB RAM Chip Set

Each set contains four 1 Mbit x 480 ns DRAM 20-pin DIP

chips

By installing RAM chip sets, you can increase the printer’s

memory until it totals 6.5MB (for the ActionLaser 1000) or

5.0MB (for ActionLaser 1500), including the resident memory.

First decide on how much memory you wish to add, then

install the RAM chips on the controller board. If you have

questions about this process, contact your dealer.