Epson 1000 Guide De Référence

The printer displays one of these status messages when you

have insufficient memory:

These messages are described in more detail in Chapter 3.

You need to add memory if one of these messages appears and

you are unable to resolve the memory problem as described in

Chapter 3, “Troubleshooting,” or if the following situations

require additional memory.

Using an optional identity card requires at least 1.5MB

RAM.

Using the SelecType Level 2 USER INDIVIDUAL setting

requires at least 0.5MB RAM per channel. If you plan to use

more than one interface channel for the ActionLaser 1000 or

more than two interface channels for the ActionLaser 1500,

you must add at least 0.5MB RAM.

Before adding memory, you should determine the combination

of chip sets you need to obtain the desired total RAM. Keep in

mind that the ActionLaser 1000 comes with 0.5MB RAM and

the ActionLaser 1500 comes with 1.0MB RAM.