Canon LV-7292M Manuel D'Instructions

65

OK

POWER

AUTO SET

MENU

LAMP REPLACE

WARNING

VOL

VOL

The WARNING indicator shows the state of the function which protects the projector. Check the 

state of the WARNING indicator and the POWER indicator to take proper maintenance. 

When the temperature inside the projector 

reaches a certain level, the projector will be 

automatically shut down to protect the inside 

of the projector. The POWER indicator is 

blinking while the projector is being cooled 

down. When the projector has cooled down 

enough (to its normal operating temperature), 

it can be turned on again by pressing the 

POWER button.

WARNING indicator lights red.
When the projector detects an abnormal 

condition, it is automatically shut down to 

protect the inside of the projector and the 

WARNING indicator lights red. In this case, 

unplug the AC power cord and reconnect it, 

and then turn the projector on once again to 

verify operation. If the projector cannot be 

turned on and the WARNING indicator still 

lights red, unplug the AC power cord and 

contact the service center. 



The WARNING indicator continues to blink even 

after the temperature inside the projector returns 

to normal. When the projector is turned on again, 

the WARNING  indicator stops blinking. 

Then check the matters below:
–  Did you provide appropriate space for 

the projector to be ventilated? Check the 

installing condition to see if the air vents of 

the projector are not blocked.

–  Has the projector been installed near an Air-

Conditioning/ Heating Duct or Vent? Move 

the installation of the projector away from 

the duct or vent.

–  Is the filter clean? Clean the filter 

periodically.

WARNING 

blinking red

OK

POWER

AUTO SET

MENU

LAMP REPLACE

WARNING

VOL

VOL

WARNING 

lights red