Canon LV-7292M Manuel D'Instructions

67

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning 

cloth that contains a small amount of non-

abrasive camera lens cleaner, or use a lens 

cleaning paper or commercially available air 

blower to clean the lens. 

Avoid using an excessive amount of cleaner. 

Abrasive cleaners, solvents, or other harsh 

chemicals might scratch the surface of the 

lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry 

cleaning cloth. When the cabinet is heavily 

soiled, use a small amount of mild detergent 

and finish with a soft dry cleaning cloth. 

Avoid using an excessive amount of cleaner. 

Abrasive cleaners, solvents, or other harsh 

chemicals might scratch the surface of the 

cabinet.

When the projector is not in use, put the 

projector in an appropriate carrying case to 

protect it from dust and scratches.

When moving this projector or while not using 

it over an extended period of time, attach the 

lens cap.

Attach the lens cap according to the following 

procedures.

Thread the string through the hole on the 

lens cap and then tie a knot in the string 

to secure it in place.

To pass the other end of the string into the 

hole on the bottom of the projector and 

pull at it.

Do not use any flammable solvents or air 

sprays on the projector and in its vicinity. 

The explosion or fire hazard may occur 

even after the AC power cord is unplugged 

because the temperature inside the projector 

is extremely high due to the lamps. In 

addition, there is a risk that the internal parts 

may be damaged not only by the flammable 

air spray but also by the cold air.