Cisco Cisco Unified MeetingPlace Audio Server Manuel De Maintenance
7-10
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 7 Installing a Shadow Server
Configuring the shadow server while in standalone mode
Step 13
At the tech$ prompt, type
update
and press Enter.
Step 14
Once the update is complete, remove the disk from the floppy drive by pressing the eject button and
removing the disk.
removing the disk.
Configuring the shadow server while in standalone mode
Before configuring the shadow server as a shadow server, the following items must be configured:
•
telephony configuration. Refer to the
.
•
LAN parameters. Refer to the
.
•
MeetingTime telephony access parameters. Refer to the
•
MeetingTime max recording space. Refer to the
.
•
MeetingTime server configuration. Refer to the
.
•
necessary languages. Refer to the
.
•
gateway routing. Refer to the
Telephony and LAN parameters configuration
Step 1
Run the "net" and "blade" commands to configure the telephony and LAN parameters. Use the
information in
information in
For more information about these commands, refer to
.
Note
When configuring the shadow server’s LAN parameters, it is configured locally as unit 0.
Step 2
Once the telephony and LAN configuration is complete, the system must be restarted. At the tech$
prompt, type
prompt, type
restart
and press Enter.
MeetingTime server configuration
Step 1
Once the system is back up, log into MeetingTime and go to the
Configure
tab.
Note
All MeetingTime values are replicated to the shadow server via the restore that was done. All
values that are different between the primary server and the shadow server need to be manually
configured in MeetingTime.
values that are different between the primary server and the shadow server need to be manually
configured in MeetingTime.
Step 2
Select
Telephony Access
from the left pane and click
Query
. Values appear in the right pane.