Cisco Cisco Unified MeetingPlace Audio Server Manuel De Maintenance
4-19
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Configuring the LAN parameters
The LAN parameters identify the MeetingPlace server on the customer’s TCP/IP network. The site
contact supplies the LAN parameters via the MeetingPlace Audio Server 5.2 Installation Planning Guide
worksheet 3-3. To configure the LAN parameters, follow this procedure.
contact supplies the LAN parameters via the MeetingPlace Audio Server 5.2 Installation Planning Guide
worksheet 3-3. To configure the LAN parameters, follow this procedure.
Step 1
If you do not already have terminal logging turned on, turn it on before proceeding. For information on
logging, see the
logging, see the
.
Step 2
Type
getether
and press Enter. The Ethernet address of the MeetingPlace server appears as in
. (For more information about the “getether” command, see the
.)
Figure 4-20 getether Command
Step 3
Record the Ethernet address for future use.
Step 4
At the tech$ prompt, type
net
and press Enter.
appears. (For more information about the
“net” command, see
.)
Figure 4-21 net Command Menu
Step 5
Type
2
appears.
Figure 4-22 net Command Modify Menu
meetingplace:tech$ getether
0001af0bc2cd
meetingplace:tech$ net
1) View the server & site configuration
2) Modify the server configuration
3) Select another server (current unit = #0)
99) Quit
Select:
Select: 2
1) View the current configuration
2) Select a different site for this server
3) Change the host and site names
4) Change server IP address and Ethernet address
5) Change site subnet mask or broadcast addr
6) Change site routing information
7) Change network time protocol servers
99) Return to the main menu