Руководство По Обслуживанию для Cisco Cisco Unified MeetingPlace Audio Server

The LAN parameters identify the MeetingPlace server on the customer’s TCP/IP network. The site 
contact supplies the LAN parameters via the MeetingPlace Audio Server 5.2 Installation Planning Guide 
worksheet 3-3. To configure the LAN parameters, follow this procedure.

If you do not already have terminal logging turned on, turn it on before proceeding. For information on 
logging, see the 

.

Type 

getether

 and press Enter. The Ethernet address of the MeetingPlace server appears as in 

. (For more information about the “getether” command, see the 

.)

Record the Ethernet address for future use.

At the tech$ prompt, type 

net

 and press Enter. 

 appears. (For more information about the 

“net” command, see 

.)

Type 

2

 and press Enter to modify the server configuration. 

 appears.

meetingplace:tech$ getether

0001af0bc2cd

meetingplace:tech$ net

 1) View the server & site configuration

 2) Modify the server configuration

 3) Select another server (current unit = #0)

99) Quit

Select: 

Select: 2

 

 1) View the current configuration

 2) Select a different site for this server

 3) Change the host and site names

 4) Change server IP address and Ethernet address

 5) Change site subnet mask or broadcast addr

 6) Change site routing information

 7) Change network time protocol servers

99) Return to the main menu