Cisco Cisco Unified MeetingPlace Audio Server Manuel De Maintenance
7-15
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 7 Installing a Shadow Server
Testing the switchover
Running MeetingTime reports
Step 1
Log into MeetingTime on the primary server.
Step 2
Go to the
Report
tab and select
Raw Meeting Details
in the left pane.
Step 3
Click
Execute
.
Step 4
Once the report is finished, save it in a convenient location.
Step 5
Select
Raw Profile Information
in the left pane.
Step 6
Click
Execute
.
Step 7
Once the report is finished, save it to a convenient location.
Step 8
Exit MeetingTime.
Shutting down the primary server
Step 1
If not already connected, access the primary server’s CLI by following the procedures in the
and
Step 2
Log in as technician. The tech$ prompt appears.
Step 3
Type
down disable
and press Enter.
Step 4
Type
y
and press Enter to confirm that you want to shut down the system.
Switching shadow server to primary server
Step 1
If not already connected, access the shadow server’s CLI by following the procedures in the
and
Step 2
Log in as technician. The tech$ prompt appears.
Step 3
Type
setup
and press Enter.
Step 4
Type
1
and press Enter to select MeetingPlace -- Standalone (SINGLE).
Step 5
Once the setup has been changed, type
restart enable
and press Enter.
Step 6
Complete the steps in
Table 7-4
Post-switchover Tasks
X
Task
Compare the Raw Meeting Details Report from the
information to be sure it is replicating.
Compare the Raw Profile Information Report from the
information to be sure it is replicating.