Cisco Cisco Unified MeetingPlace Audio Server Manuel De Maintenance
D-7
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Appendix D Configuring NSF Codes
Configuring NSF codes
Step 10
Type the CIC network type and press Enter. Depending on the installation, it is “user”, “natl”, “intl”,
“user4”, “natl4”, or “intl4”. Refer to worksheet F-1 in the MeetingPlace Audio Server 5.2 Installation
Planning Guide.
“user4”, “natl4”, or “intl4”. Refer to worksheet F-1 in the MeetingPlace Audio Server 5.2 Installation
Planning Guide.
Step 11
Type the CIC code from worksheet F-1 in the MeetingPlace Audio Server 5.2 Installation Planning
Guide and press Enter.
Guide and press Enter.
Step 12
Type x and press Enter to go back to the main “protparm” utility menu.
Step 13
Type x and press Enter to exit the “protparm” utility.
Assigning necessary port groups to use the new protocol table
All port groups that have ports using NSF codes need to be assigned to use the new protocol table. For
more information, refer to the
more information, refer to the
Step 1
At the tech$ prompt, type port and press Enter.
appears.
Figure D-5
port Command Menu
Step 2
Type 5 and press Enter to modify the group record. The second line in
appears.
meetingplace:tech$ port
MeetingPlace is up
***** P O R T / G R O U P C O N F I G M E N U *****
1) View port record(s)
2) Modify port record
3) Copy port records
4) View group record(s)
5) Modify group record
x) Exit program
Enter command: