Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual

D-7

Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)

78-16411-01

Appendix D Configuring NSF Codes

Configuring NSF codes

Step 10

Type the CIC network type and press Enter. Depending on the installation, it is “user”, “natl”, “intl”,
“user4”, “natl4”, or “intl4”. Refer to worksheet F-1 in the MeetingPlace Audio Server 5.2 Installation
Planning Guide.

Step 11

Type the CIC code from worksheet F-1 in the MeetingPlace Audio Server 5.2 Installation Planning
Guide and press Enter.

Step 12

Type x and press Enter to go back to the main “protparm” utility menu.

Step 13

Type x and press Enter to exit the “protparm” utility.

Assigning necessary port groups to use the new protocol table

All port groups that have ports using NSF codes need to be assigned to use the new protocol table. For
more information, refer to the

“port” section on page A-42

Step 1

At the tech$ prompt, type port and press Enter.

Figure D-5

appears.

Figure D-5

port Command Menu

Step 2

Type 5 and press Enter to modify the group record. The second line in

Figure D-6

appears.

meetingplace:tech$ port

MeetingPlace is up

***** P O R T / G R O U P C O N F I G M E N U *****

1) View port record(s)

2) Modify port record

3) Copy port records

4) View group record(s)

5) Modify group record

x) Exit program

Enter command: