Cisco Cisco IOS Software Release 12.4(6)T

IP SLAs ICMP Jitter Operation

How to Configure the IP SLAs ICMP Jitter Operation

Cisco IOS Release 12.4(6)T

DETAILED STEPS

Command or Action

Purpose

Step 1

enable

Example:

Router> enable

Enables privileged EXEC mode.

•

Enter your password if prompted.

Step 2

configure

terminal

Example:

Router# configure terminal

Enters global configuration mode.

Step 3

ip sla

operation-number

Example:

Router(config)# ip sla 10

Begins configuration for an IP SLAs operation and enters IP
SLA configuration mode.

Step 4

icmp-jitter

{destination-ip-address |

destination-hostname} [interval milliseconds]

[num-packets packet-number] [source-ip

{ip-address | hostname}]

Example:

Router(config-ip-sla)# icmp-jitter 172.18.1.129

interval 40 num-packets 100 source-ip 10.1.2.34

Configures the IP SLAs operation as an ICMP jitter
operation and enters IP SLAs ICMP jitter configuration
mode.

Step 5

frequency

seconds

Example:

Router(config-ip-sla-icmpjitter)# frequency 30

(Optional) Sets the rate at which a specified IP SLAs
operation repeats.

Step 6

history

history-parameter

Example:

Router(config-ip-sla-icmpjitter)# history

hours-of-statistics-kept 3

(Optional) Specifies the parameters used for gathering
statistical history information for an IP SLAs operation.

Step 7

owner

owner-id

Example:

Router(config-ip-sla-icmpjitter)# owner admin

(Optional) Configures the Simple Network Management
Protocol (SNMP) owner of an IP SLAs operation.

Step 8

tag

text

Example:

Router(config-ip-sla-icmpjitter)# tag

TelnetPollServer1

(Optional) Creates a user-specified identifier for an IP SLAs
operation.

Step 9

threshold

milliseconds

Example:

Router(config-ip-sla-icmpjitter)# threshold

10000

(Optional) Sets the rising threshold (hysteresis) that
generates a reaction event and stores history information for
an IP SLAs operation.