Cisco Cisco IOS Software Release 12.4(6)T
IP SLAs ICMP Jitter Operation
How to Configure the IP SLAs ICMP Jitter Operation
5
Cisco IOS Release 12.4(6)T
Step 10
timeout
milliseconds
Example:
Router(config-ip-sla-icmpjitter)# timeout 10000
(Optional) Sets the amount of time an IP SLAs operation
waits for a response from its request packet.
waits for a response from its request packet.
Step 11
tos
number
Example:
Router(config-ip-sla-icmpjitter)# tos 160
(Optional) Defines a type of service (ToS) byte in the IP
header of an IP SLAs operation.
header of an IP SLAs operation.
Step 12
vrf
vrf-name
Example:
Router(config-ip-sla-icmpjitter)# vrf vpn-A
(Optional) Allows monitoring within Multiprotocol Label
Switching (MPLS) Virtual Private Networks (VPNs) using
IP SLAs operations.
Switching (MPLS) Virtual Private Networks (VPNs) using
IP SLAs operations.
Step 13
exit
Example:
Router(config-ip-sla-icmpjitter)# exit
Exits IP SLAs ICMP jitter configuration submode and
returns to global configuration mode.
returns to global configuration mode.
Step 14
ip sla reaction-configuration
operation-number
react
monitored-element [action-type option]
[threshold-type {average
[number-of-measurements] | consecutive
[occurrences] | immediate | never | xofy
[x-value y-value]}] [threshold-value
upper-threshold lower-threshold]
Example:
Router(config)# ip sla reaction-configuration 1
react jitterAvg threshold-value 5 2 action-type
trap threshold-type immediate
(Optional) Configures certain actions to occur based on
events under the control of Cisco IOS IP SLAs.
events under the control of Cisco IOS IP SLAs.
Step 15
ip sla schedule
operation-number [life
{forever | seconds}] [start-time {hh:mm[:ss]
[month day | day month] | pending | now |
after
hh:mm:ss] [ageout seconds] [recurring]
Example:
Router(config)# ip sla schedule 10 start-time
now life forever
Configures the scheduling parameters for an individual IP
SLAs operation.
SLAs operation.
Step 16
exit
Example:
Router(config)# exit
(Optional) Exits global configuration mode and returns to
privileged EXEC mode.
privileged EXEC mode.
Step 17
show ip sla configuration
[operation-number]
Example:
Router# show ip sla configuration 10
(Optional) Displays configuration values including all
defaults for all IP SLAs operations or a specified operation.
defaults for all IP SLAs operations or a specified operation.
Command or Action
Purpose