Cisco Cisco IOS Software Release 12.4(6)T
IP SLAs ICMP Jitter Operation
How to Configure the IP SLAs ICMP Jitter Operation
3
Cisco IOS Release 12.4(6)T
How to Configure the IP SLAs ICMP Jitter Operation
This section contains the following task:
•
Configuring an IP SLAs ICMP Jitter Operation
Perform this task to configure and schedule an IP SLAs ICMP jitter operation.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ip sla operation-number
4.
icmp-jitter {destination-ip-address | destination-hostname} [interval milliseconds] [num-packets
packet-number] [source-ip {ip-address | hostname}]
packet-number] [source-ip {ip-address | hostname}]
5.
frequency seconds
6.
history history-parameter
7.
owner owner-id
8.
tag text
9.
threshold milliseconds
10.
timeout milliseconds
11.
tos number
12.
vrf vrf-name
13.
exit
14.
ip sla reaction-configuration operation-number react monitored-element [action-type option]
[threshold-type {average [number-of-measurements] | consecutive [occurrences] | immediate |
never | xofy [x-value y-value]}] [threshold-value upper-threshold lower-threshold]
[threshold-type {average [number-of-measurements] | consecutive [occurrences] | immediate |
never | xofy [x-value y-value]}] [threshold-value upper-threshold lower-threshold]
15.
ip sla schedule operation-number [life {forever | seconds}] [start-time {hh:mm[:ss] [month day | day
month] | pending | now | after hh:mm:ss] [ageout seconds] [recurring]
month] | pending | now | after hh:mm:ss] [ageout seconds] [recurring]
16.
exit
17.
show ip sla configuration [operation-number]