Cisco Cisco IOS Software Release 12.2(15)T Guide Du Développeur

This command has no arguments or keywords.

EXEC mode

The following example shows output from the show gatekeeper status command:

Router# show gatekeeper status

Gatekeeper State: UP

    Load Balancing:   DISABLED

    Flow Control:     ENABLED

    Zone Name:        snet-3660-3

    Accounting:       DISABLED

    Endpoint Throttling:        DISABLED

    Security:         DISABLED

    Maximum Remote Bandwidth:              unlimited

    Current Remote Bandwidth:              0 kbps

    Current Remote Bandwidth (w/ Alt GKs): 0 kbps

 describes the significant fields shown in the display.

Gatekeeper State

Gatekeeper state has the following values:

UP is operational.

DOWN is administratively shut down.

INACTIVE is administratively enabled, that is, the no shutdown 
command has been issued, but no local zones have been 
configured.

HSRP STANDBY indicates that the gatekeeper is on hot standby 
and will take over when the currently active gatekeeper fails.

Load Balancing

Shows if load balancing is enabled.

Flow Control

Shows if server flow control is enabled.

Zone Name

Displays the zone name to which the gatekeeper belongs.

Accounting

Shows if authorization and accounting features are enabled.

Endpoint Throttling

Shows if endpoint throttling is enabled.

Security

Shows if security features are enabled.

Bandwidth

Shows the maximum remote bandwidth, current remote bandwidth, 
and current remote bandwidth with alternate gatekeepers.