Cisco Cisco IOS Software Release 12.2(8)T
ATM Software Segmentation and Reassembly (SAR)
ATM Software Segmentation and Reassembly (SAR)
72
Cisco IOS Release 12.2(8)T
SESS_SET_FULL_IS—A session group in-service that has ACTIVE notification, and at least one
session group in-service has STANDBY notification.
session group in-service has STANDBY notification.
SESS_SET_SWITCH_OVER—An ACTIVE notification is received on session group in-service, that
had received STANDBY notification.
had received STANDBY notification.
Step 3
Enter the show backhaul-session-manager group status all command to display the status of all
session-groups.
session-groups.
The status is either Group-OutOfService (no session in the group has been established) or
Group-Inservice (at least one session in the group has been established).
Group-Inservice (at least one session in the group has been established).
The Status (use) is either Group-Standby (the Cisco VSC3000 connected to the other end of this group
will go into standby mode), Group-Active (the Cisco VSC3000 connected to the other end of this group
will be the active Cisco VSC3000), or Group-None (the Cisco VSC3000 has not declared its intent yet).
will go into standby mode), Group-Active (the Cisco VSC3000 connected to the other end of this group
will be the active Cisco VSC3000), or Group-None (the Cisco VSC3000 has not declared its intent yet).
Router# show backhaul-session-manager group status all
Session-Group
Group Name :grp1
Set Name :set1
Status :Group-OutOfService
Status (use) :Group-None
Step 4
Enter the show backhaul-session-manager session all command to display all sessions.
The State is OPEN (the connection is established), OPEN_WAIT (the connection is awaiting
establishment), OPEN_XFER (session failover is in progress for this session, which is a transient state),
or CLOSE (this session is down, also a transient state). The session moves to OPEN_WAIT after waiting
a fixed amount of time.
establishment), OPEN_XFER (session failover is in progress for this session, which is a transient state),
or CLOSE (this session is down, also a transient state). The session moves to OPEN_WAIT after waiting
a fixed amount of time.
The Use-status field indicates whether PRI signaling traffic is being transported over this session. The
field will be either OOS (this session is not being used to transport signaling traffic) or IS (this session
is being used currently to transport all PRI signaling traffic). The User-status field indicates the
connection status.
field will be either OOS (this session is not being used to transport signaling traffic) or IS (this session
is being used currently to transport all PRI signaling traffic). The User-status field indicates the
connection status.
Router# show backhaul-session-manager session all
Session information --
Session-id:35
Group:grp1
Configuration:
Local:10.1.2.15 , port:8303
Remote:10.5.0.3 , port:8303
Priority:2
RUDP Option:Client, Conn Id:0x2
State:
Status:OPEN_WAIT, Use-status:OOS
Statistics:
# of resets:0
# of auto_resets 0
# of unexpected RUDP transitions (total) 0
# of unexpected RUDP transitions (since last reset) 0
Receive pkts - Total:0 , Since Last Reset:0
Recieve failures - Total:0 ,Since Last Reset:0
Transmit pkts - Total:0, Since Last Reset:0
Transmit Failures (PDU Only)
Due to Blocking (Not an Error) - Total:0, Since Last Reset:0
Due to causes other than Blocking - Total:0, Since Last
Reset:0
Transmit Failures (NON-PDU Only)
Due to Blocking(Not an Error) - Total:0, Since Last Reset:0
Due to causes other than Blocking - Total:0, Since Last