Cisco Cisco IOS Software Release 12.2(8)T
ATM Software Segmentation and Reassembly (SAR)
ATM Software Segmentation and Reassembly (SAR)
74
Cisco IOS Release 12.2(8)T
Monitoring and Maintaining Signaling Backhaul
Use the following commands as required to monitor and maintain the signaling backhaul sessions and
the connection to the Cisco VSC3000:
the connection to the Cisco VSC3000:
Configuration Examples
This section provides the following configuration examples:
•
–
–
•
–
–
–
–
–
Cisco 2600 Series
MGCP CAS Voice/FAX Call Examples
Originating Gateway Configuration Example
2650-org# show run
Building configuration...
Current configuration:
Command
Purpose
Router# clear backhaul-session-manager group
Resets the statistics for all available session groups or a
specified session group.
specified session group.
Router# show backhaul-session-manager set
Displays status, statistics, or configuration of all available
session sets.
session sets.
Router# show backhaul-session-manager group
Displays status, statistics, or configuration of all available
session groups.
session groups.
Router# show backhaul-session-manager session
Displays status, statistics, or configuration of all available
sessions.
sessions.
Router# show isdn status
Displays status of ISDN backhaul. If the connection to the
Cisco VSC3000 is lost, the router shuts down Layer 2 so that it
cannot receive more calls. When the Cisco VSC3000
connection is back up, you may use this to verify that Layer 2
was also brought back up correctly.
Cisco VSC3000 is lost, the router shuts down Layer 2 so that it
cannot receive more calls. When the Cisco VSC3000
connection is back up, you may use this to verify that Layer 2
was also brought back up correctly.