Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques

To display debug messages for the intelligent PDSN selection feature, use the debug cdma pdsn 
selection command in privileged EXEC mode. To disable debug messages, use the no form of this 
command.

debug cdma pdsn selection {errors | events | packets}

no debug cdma pdsn selection {errors | events | packets}

No default behavior or values.

The following is sample output from the debug cdma pdsn selection command with the keyword events 
specified:

Router#debug cdma pdsn selection events 

CDMA PDSN selection events debugging is on

Router#

00:27:46: CDMA-PSL: Message(IN) pdsn 51.4.2.40 interface 70.4.2.40

00:27:46:                Keepalive 10

00:27:46:                Count 0

00:27:46:                Capacity 16000

00:27:46:                Weight 0

00:27:46:                Hostname 11 7206-PDSN-2

00:27:46: CDMA-PSL: Reset keepalive, pdsn 51.4.2.40 current 10 new 10

00:27:46: CDMA-PSL: Message processed, pdsn 51.4.2.40 tsize 0 pendings 0

00:27:47: CDMA-PSL: Send KEEPALIVE, len 32

00:27:47: CDMA-PSL: Message(OUT) dest 224.0.0.11

00:27:47:                Keepalive 10

00:27:47:                Count 1

00:27:47:                Capacity 16000

00:27:47:                Weight 0

00:27:47:                Hostname 11 7206-PDSN-1

00:27:47: CDMA-PSL: RRQ sent, s=70.4.1.40 (FastEthernet0/1), d=224.0.0.11

Displays pdsn selection errors.

Displays pdsn selection events.

Displays transmitted or received packets.

12.1(3)XS

This command was introduced.