Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques
118
Command Reference for Cisco PDSN Release 4.0 in IOS Release 12.4(15)XR
debug cdma pdsn service-selection
To display debug messages for service selection, use the debug cdma pdsn service-selection command
in privileged EXEC mode. To disable debug messages, use the no form of this command.
in privileged EXEC mode. To disable debug messages, use the no form of this command.
debug cdma pdsn service-selection
no debug cdma pdsn service-selection
Syntax Description
This command has no arguments or keywords.
Defaults
No default behavior or values.
Command History
Examples
The following is sample output from the debug cdma pdsn service-selection command:
Router# debug cdma pdsn service-selection
CDMA PDSN service provisioning debugging is on
Router#
1d02h:%LINK-3-UPDOWN:Interface Virtual-Access3, changed state to up
1d02h:Vi3 CDMA-SP:user_class=1, ms_ipaddr_req=1, apply_acl=0
1d02h:Vi3 CDMA-SP:Adding simple ip flow, user=bsip, mn=6.0.0.2,
1d02h:%LINEPROTO-5-UPDOWN:Line protocol on Interface Virtual-Access3,
changed state to up
Release
Modification
12.1(3)XS
This command was introduced.