Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques

To display debug messages for Session Manager errors, events, and packets, use the debug cdma pdsn 
session-manager command in privileged EXEC mode. To disable debug messages, use the no form of 
this command.

debug cdma pdsn session [errors | events]

no debug cdma pdsn session [errors | events]

If the command is entered without any optional keywords, all of the types of debug information are 
enabled.

The following is sample output from the debug cdma pdsn session command:

Router# debug cdma pdsn session events

CDMA PDSN session events debugging is on

Router# debug cdma pdsn session errors

CDMA PDSN session errors debugging is on

Router# show debug

CDMA:

  CDMA PDSN session events debugging is on

  CDMA PDSN session errors debugging is on

Router#

*Jan  1 00:22:27:CDMA-SM:create_session 5.5.5.5-4.4.4.5-2

*Jan  1 00:22:27:CDMA-SM:create_tunnel 5.5.5.5-4.4.4.5

*Jan  1 00:22:27:%LINK-3-UPDOWN:Interface Virtual-Access1, changed state to up

*Jan  1 00:22:29:CDMA-SM:create_flow mn=0.0.0.0, ha=8.8.8.8 nai=l2tp2@cisco.com

*Jan  1 00:22:30:%LINEPROTO-5-UPDOWN:Line protocol on Interface Virtual-Access1, changed 

state to up

(Optional) Displays session protocol errors.

(Optional) Displays session events.

12.1(3)XS

This command was introduced.

12.2(8)BY

Keywords were made optional.

12.4xx

Enhanced to display the Auxiliary A10 and IP flow parsing and installation 
details.