Cisco Cisco Email Security Appliance C160 Mode D'Emploi

redirectrecipients

suspenddel

 / 

resumedel

suspendlistener

 / 

resumelistener

Use the 

tophosts

 command to check the number of soft and hard bounces. Sort by “Soft Bounced 

Events” (option 

4

) or “Hard Bounced Recipients” (option 

5

). If the performance for a particular 

domain is problematic, use the commands above to manage the delivery to that domain. 

You have C380 or C680 hardware and you receive a “Battery Relearn Timed Out” (RAID event) 

alert. 

This alert may or may not indicate a problem. The battery relearn timeout, in itself, does not 

mean there is any problem with the RAID controller. The controller can recover in the subsequent 
relearn. Please monitor your email for any other RAID alerts for the next 48 hours, to ensure that this is 
not the side-effect of any other problem. If you do not see any other RAID-related alerts from the system, 
then you can safely ignore this alert. 

You receive an alert that Miscellaneous disk usage is approaching its quota. 

You can either increase the quota or delete files. See 

If the appliance requires a hard reset, you can reboot the appliance chassis remotely using a third-party 
Intelligent Platform Management Interface (IPMI) tool. 

Remote power management is available only on certain hardware. 

For specifics, see 

. 

If you want be able to use this feature, you must enable it in advance, before you need to use it. 

For details, see 

Only the following IPMI commands are supported:

status, on, off, cycle, reset, diag, soft