Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE Manuel De Maintenance
Getting Started
Using the Access Point Setup Wizard
Cisco WAP131 and WAP351 Administration Guide
15
1
STEP 17
Select whether or not to set up an authentication method for guests on your
network, and click Next.
network, and click Next.
If you click Yes, the Enable Captive Portal - Name Your Guest Network window
appears.
appears.
STEP 18
Specify a Guest Network Name.
STEP 19
Click Next. The Enable Captive Portal - Secure Your Guest Network window
appears.
appears.
STEP 20
Choose a security encryption type for the guest network and enter a security key.
For a description of these options, see
For a description of these options, see
STEP 21
Click Next. The Enable Captive Portal - Assign the VLAN ID window appears.
STEP 22
Specify a VLAN ID for the guest network. The guest network VLAN ID should be
different from the management VLAN ID.
different from the management VLAN ID.
STEP 23
Click Next. The Enable Captive Portal - Enable Redirect URL window appears.
STEP 24
Check Enable Redirect URL and enter a fully qualified domain name (FQDN) or IP
address in the Redirect URL field (including http://). If specified, the guest
network users are redirected to the specified URL after authenticating.
address in the Redirect URL field (including http://). If specified, the guest
network users are redirected to the specified URL after authenticating.
STEP 25
Click Next. The Summary - Confirm Your Settings window appears.
STEP 26
Review the settings that you configured. Click Back to reconfigure one or more
settings. If you click Cancel, all settings are returned to the previous or default
values.
settings. If you click Cancel, all settings are returned to the previous or default
values.
STEP 27
If they are correct, click Submit. Your setup settings are saved and a confirmation
window appears.
window appears.
STEP 28
Click Finish.
The WAP device was configured successfully. You are required to log in again with
the new password.
the new password.