Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE メンテナンスマニュアル

Using the Access Point Setup Wizard

Cisco WAP131 and WAP351 Administration Guide

15

Select whether or not to set up an authentication method for guests on your 
network, and click Next.

If you click No, skip to 

If you click Yes, the Enable Captive Portal - Name Your Guest Network window 
appears.

Specify a Guest Network Name.

Click Next. The Enable Captive Portal - Secure Your Guest Network window 
appears.

Choose a security encryption type for the guest network and enter a security key. 
For a description of these options, see 

Click Next. The Enable Captive Portal - Assign the VLAN ID window appears.

Specify a VLAN ID for the guest network. The guest network VLAN ID should be 
different from the management VLAN ID.

Click Next. The Enable Captive Portal - Enable Redirect URL window appears.

Check Enable Redirect URL and enter a fully qualified domain name (FQDN) or IP 
address in the Redirect URL field (including http://). If specified, the guest 
network users are redirected to the specified URL after authenticating.

Click Next. The Summary - Confirm Your Settings window appears.

Review the settings that you configured. Click Back to reconfigure one or more 
settings. If you click Cancel, all settings are returned to the previous or default 
values.

If they are correct, click Submit. Your setup settings are saved and a confirmation 
window appears.

Click Finish. 

The WAP device was configured successfully. You are required to log in again with 
the new password.