Cisco Headend System Release 2.7 Guide De Montage
Chapter 1 Preparing to Install the Software
18
4026031 Rev B
9 Type
exit
and press
Enter
to log out as the root user.
10 Is the grep process the only process listed?
If
yes
, go to Stopping the DNCS Processes (on page 18).
If
no
, call Cisco Services.
Stopping the DNCS Processes
1 Close all remote connections to the DNCS.
2 On the DNCS, click the middle mouse button and select DNCS Stop. The DNCS
2 On the DNCS, click the middle mouse button and select DNCS Stop. The DNCS
begins shutting down all of its processes. This takes approximately 2 minutes to
complete.
complete.
3 Open an xterm window on the DNCS.
4 At the prompt, type dncsControl and press Enter. The DNCS Control window
4 At the prompt, type dncsControl and press Enter. The DNCS Control window
opens.
5 Type 2 to select Startup/Shutdown Single Element Group and press Enter. A
list appears of all the DNCS processes and shows their current working states
(running or stopped).
(running or stopped).
6 On the DNCS Control window, press Enter to update the working states of the
DNCS processes. Continue to press Enter every few seconds until all processes
show Curr Stt: stopped(1).
Note: You will not see a status message while the processes are shutting down.
show Curr Stt: stopped(1).
Note: You will not see a status message while the processes are shutting down.
7 When all processes show Curr Stt: stopped(1), follow the on-screen instructions
to close the DNCS Control window.
8 Close any windows that may be open on the DNCS, except the xterm window.
9 Go to Stopping the cron Jobs on the DNCS (on page 18).
9 Go to Stopping the cron Jobs on the DNCS (on page 18).
Stopping the cron Jobs on the DNCS
Note
: A cron job is a program that runs automatically without specific user
intervention.
1 Are you logged into the DNCS as root user?
1 Are you logged into the DNCS as root user?
If
yes
, go to step 5.
If
no
, go to step 2.
2 Open an xterm window on the DNCS.
3 At the prompt, type
3 At the prompt, type
su -
and press
Enter
. A password prompt appears.
4 Type the root user password and press
Enter
. A prompt for the root user
appears.