Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Adding and Deleting Service Groups to a USRM Using the Web Interface
78-4021139-01 Rev D
341
2 Select the desired USRM under Primary SDV Server. Enter the mini-carousel
multicast destination IP address. Enter the service group maximum bandwidth.
3 Recommended optional step: In a DNCS 4.2.0 system, if GQAMs are used in the
USRM's SDV service group, enter the QAM carriers into the Selected Ports
window. While this information is not directly provisioned into the USRM by
the DNCS, allocating the carriers here eliminates the potential that an operator
will inadvertently "reuse" them as a VOD carrier by taking them out of the
Available Ports list.
Note: For a system running DNCS release 4.2.1 or greater, step 3 is also
Note: For a system running DNCS release 4.2.1 or greater, step 3 is also
applicable to any third party QAMs that are being used/shared by the DNCS
and USRM.
4 Click Save Service Group to save your changes.
Adding Resources to the USRM and Associating QAM Output Ports to Service Groups
The USRM supports all Cisco QAMs (GQAM, RFGW, xDQA) as well as third party
The USRM supports all Cisco QAMs (GQAM, RFGW, xDQA) as well as third party
QAMs that adhere to the GQI and NGOD specifications. This procedure uses Cisco
QAMs as examples.