Samsung T27B551EW Manuel D’Utilisation
Your product supports only the following wireless network security protocols:
– Authentication Mode : WEP, WPAPSK, WPA2PSK
– Encryption Type : WEP, TKIP, AES
✎
To use a wireless network, your product must be connected to a wireless IP sharer (either a router or a modem).
If the wireless IP sharer supports DHCP, your product can use a DHCP or static IP address to connect to the
wireless network.
If the wireless IP sharer supports DHCP, your product can use a DHCP or static IP address to connect to the
wireless network.
✎
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP
sharer is currently being used by another device nearby, this will result in interference and communication failure.
sharer is currently being used by another device nearby, this will result in interference and communication failure.
✎
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP or TKIP
on your AP or wireless router, Samsung products will not support a connection in compliance with new Wi-Fi
certification specifications.
on your AP or wireless router, Samsung products will not support a connection in compliance with new Wi-Fi
certification specifications.
✎
If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push
Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA
key in either mode.
Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA
key in either mode.
✎
If your router, modem, or device is not certified, it may not connect to the product.
✎
Connection Methods: You can set up the wireless network connection in three ways:
– Using Auto Setup (with the Auto Network Search function)
– Using Manual Setup
– Using
WPS(PBC)
English - 66
English - 67
Network Features