Samsung T27B551EW Manuel D’Utilisation

Manual Wired Network Setup

You can configure your product's wired network connection manually when connecting your product to a network that
requires a Static IP address.

Getting the Network Connection Values

To view the Network connection values on Windows XP computers, follow these steps:

1. Right click the Network icon on the bottom right of the screen.

2. In the pop-up menu that appears, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support Tab, click the Details button. The Network connection values are displayed.

To set up your product's wired network connection manually, follow these steps:

1. Go to the

Network Settings

screen. (

→

Network

→

Network Settings

)

2. Select

Start

. The network connection screen appears and the verification process starts.

3. Select

Stop

. The verification process stops. Select

IP Settings

on network connection screen. The

IP Settings

screen appears.

4. Select the

IP Mode

, and then set the

IP Mode

Manual

5. Go to the

IP Address

entry field, and then select the

IP Address

using remote.

6. Enter the first portion of the

IP Address

(for example, 105) into the first entry field using your remote. When

done, go to the next field.

7. Enter the next portion of the

IP Address

. When done, go to the next field.

8. Repeat the entry process for each field in the

IP Address

✎

If you make a mistake when entering a number, re-enter the number to correct it.

9. When done, go to the

Subnet Mask

fields.

10. Repeat the same entry process for

Subnet Mask

Gateway

, and

DNS Server

11. When done, select

. The network test screen appears and the verification process starts. When the

connection has been verified, the

You are connected to the Internet. If you have any problems using online

services, please contact your Internet service provider.

message appears.

English - 68

English - 69

Network Features