Samsung RL70LBPN Manuel D’Utilisation
06_
setting up
GETTING READY TO INSTALL
THE REFRIGERATOR
THE REFRIGERATOR
Congratulations on your purchase of this Samsung
Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance
offers.
Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance
offers.
Selecting the best location for the
Refrigerator
• A location with easy access
to the water supply.
• A location without direct
exposure to sunlight.
• A location with level (or
nearly level) flooring.
• A location with enough
space for the Refrigerator
doors to open easily.
doors to open easily.
• Allow sufficient space to the right, left, back and
top for air circulation. If the Refrigerator does not
have enough space, the internal cooling system
may not work properly.
have enough space, the internal cooling system
may not work properly.
• Please ensure that appliance can be moved freely
in the event of maintenance & service.
First thing! Make sure that
you can easily move your
Refrigerator to its final location
by measuring doorways (both
width and height), thresholds,
ceilings, stairways, etc.
you can easily move your
Refrigerator to its final location
by measuring doorways (both
width and height), thresholds,
ceilings, stairways, etc.
• Allow clearance to the right, left, back and
top when installing. This will help reduce
power consumption and keep your energy
bills lower.
power consumption and keep your energy
bills lower.
• If you install the Refrigerator where is below 10ºC,
it may not function in optimum level.
When moving your refrigerator
To prevent floor damage be sure the front
leveling legs are in the up position(above the
floor). Refer to ‘Adjusting the doors’ in the
manual (on page 12)
leveling legs are in the up position(above the
floor). Refer to ‘Adjusting the doors’ in the
manual (on page 12)
FLOORING
For proper installation, this refrigerator must be
placed on a level surface of hard material that is the
same height as the rest of the flooring. This surface
should be strong enough to support a fully loaded
refrigerator, or approximately 106kg.
To protect the finish of
the flooring, cut a large
section of the cardboard
carton and place under
the refrigerator where
you are working. When
moving the refrigerator, be
sure to pull it straight out
and return it to position by
pushing it straight in.
placed on a level surface of hard material that is the
same height as the rest of the flooring. This surface
should be strong enough to support a fully loaded
refrigerator, or approximately 106kg.
To protect the finish of
the flooring, cut a large
section of the cardboard
carton and place under
the refrigerator where
you are working. When
moving the refrigerator, be
sure to pull it straight out
and return it to position by
pushing it straight in.
INSTALLATION OF THE WATER
LINE (AUTO ICE MAKER
MODEL)
LINE (AUTO ICE MAKER
MODEL)
Before you install the water line
• The water line installation is not warranted by the
refrigerator manufacturer.
So before you install the water line, read the
whole steps for installing and follow these
instructions carefully to minimize the risk of
expensive water damage.
So before you install the water line, read the
whole steps for installing and follow these
instructions carefully to minimize the risk of
expensive water damage.
• Banging pipes (water banging in the pipes) in
house plumbing can cause damage to fridge
parts and lead to water leakage or flooding. Call
a qualified plumber to correct the problem before
installing the water supply line to the fridge.
parts and lead to water leakage or flooding. Call
a qualified plumber to correct the problem before
installing the water supply line to the fridge.
setting up your refrigerator
CAUTION
150mm
100mm
100mm
1368.5mm
817mm
1249.0mm
Screwdriver(-)
Control Lever
DA68-01817M-EN.indd 6
2011.1.11 5:14:13 PM
RL62*:1460m
m
RL67*:1510m
m