3com link 1000 Manuel D’Utilisation
5-28
C
HAPTER
5: A
DVANCED
M
ANAGEMENT
About Alarm Actions
You can define up to 700 alarms for the Switch. The
actions that you can define for each alarm are
shown in
actions that you can define for each alarm are
shown in
.
Table 5-3 Alarm Actions
Action
High Threshold
Low Threshold
No action.
Notify only.
Send Trap.
Notify and
blip port.
blip port.
Send Trap. Block broadcast
and multicast traffic on
the port for 5 seconds.
and multicast traffic on
the port for 5 seconds.
Notify and
disable port.
disable port.
Send Trap. Turn port off.
Notify and
enable port.
enable port.
Send Trap. Turn port
on.
on.
Blip port.
Block broadcast and multi-
cast traffic on the port for
5 seconds.
cast traffic on the port for
5 seconds.
Disable port.
Turn port off.
Enable port.
Turn port on.
Notify and
move resilient
port.
move resilient
port.
Send Trap. If port is the
main port of a resilient link
pair then move to standby.
main port of a resilient link
pair then move to standby.
Notify and
blip device.
blip device.
Send Trap. Block broadcast
and multicast traffic on all
ports for 5 seconds.
and multicast traffic on all
ports for 5 seconds.
Notify and
disable device.
disable device.
Send trap. Turn all ports
on device off.
on device off.
Notify and
enable device.
enable device.
Send Trap. Turn ports
back to original state.
back to original state.
Blip device.
Block broadcast and multi-
cast traffic on all ports for
5 seconds.
cast traffic on all ports for
5 seconds.
Disable device.
Turn all ports on device off.
Re-enable
device.
device.
Turn ports back to
original state.
original state.