Sony rdr-gx700 Manuel D’Utilisation
71
D
V
Du
bbi
ng (R
bbi
ng (R
D
R
-G
X7
00 on
00 on
ly
)
1
Press Z (open/close), and place a
recordable disc on the tray.
recordable disc on the tray.
Make sure that the disc has enough free space
to record the contents of your tape.
to record the contents of your tape.
2
Press Z (open/close) to close the disc
tray.
tray.
Wait until “LOAD” disappears from the front
panel display.
If you use an unused DVD, formatting starts
automatically.
panel display.
If you use an unused DVD, formatting starts
automatically.
3
Insert the source DV format tape into your
digital video camera.
digital video camera.
For the recorder to record or edit, your digital
video camera must be set to video playback
mode.
video camera must be set to video playback
mode.
4
Press INPUT SELECT on the remote
repeatedly to select “DV.”
repeatedly to select “DV.”
The front panel display changes as follows:
5
Press REC MODE on the remote repeatedly
to select the recording mode.
to select the recording mode.
The recording mode changes as follows:
For details about the recording modes, see
page 41.
page 41.
6
Press TOOLS on the remote to select “DV
Audio Input,” and press ENTER. Then,
select the setting for the audio input.
Audio Input,” and press ENTER. Then,
select the setting for the audio input.
“Stereo1” (default): Records original sound
only. Normally select this when dubbing a DV
format tape.
“Mix”: Records both stereo 1 and 2.
“Stereo2”: Records additional audio only.
Select “Mix” or “Stereo2” only if you have
added a second audio channel when recording
with your digital video camera.
You are ready to start dubbing. Select one of
the dubbing methods on the following pages.
only. Normally select this when dubbing a DV
format tape.
“Mix”: Records both stereo 1 and 2.
“Stereo2”: Records additional audio only.
Select “Mix” or “Stereo2” only if you have
added a second audio channel when recording
with your digital video camera.
You are ready to start dubbing. Select one of
the dubbing methods on the following pages.
z
Hints
• You can turn off the recorder during dubbing. The
recorder completes dubbing even after being turned
off.
off.
• You can adjust the settings for the recording picture
before recording. See “Adjusting the recording picture
quality and size” (page 48).
quality and size” (page 48).
• The date and time of the recording made with your
digital video camera is assigned as the program name
in the DV Edit List (page 72).
in the DV Edit List (page 72).
Notes
• You cannot connect more than one piece of digital
video equipment to the recorder.
• You cannot control the recorder using another device
or another recorder of the same model.
• You cannot record date, time, or the contents of the
cassette memory onto the disc.
• If you record from a DV format tape with a sound track
that is recorded in multiple sampling frequencies (48
kHz, 44.1 kHz, or 32 kHz), no sound or an unnatural
sound will be output when playing back the sampling
frequency switch point on the disc.
kHz, 44.1 kHz, or 32 kHz), no sound or an unnatural
sound will be output when playing back the sampling
frequency switch point on the disc.
• In order to use this recorder’s Auto Scene Chaptering
function (pages 73, 74), be sure to correctly set the
clock on your digital video camera before shooting.
clock on your digital video camera before shooting.
• The recorded picture may be momentarily affected if
the picture size of the source image changes, or if there
is nothing recorded on the tape.
is nothing recorded on the tape.
With the recording side facing down
L2
L1
L4
L3
DV
Programme
position
position
HQ
SP
LP
EP
HSP
SLP