Toshiba estudio 3510c Manuel D’Utilisation

Scanning Remotely Using Remote Scan Driver    137

This cannot be set when the Remote Scan driver is connecting to the e-STUDIO451c Series, 
e-STUDIO452 Series, or e-STUDIO282 Series.

This sets the contrast of background color for scanning.  You can set from -4 (lowest) to 4 
(highest) in units of 1 by moving the scroll bar.

y

You can set from -2 (lowest) to 2 (highest) in units of 1 by moving the scroll bar when the 
Remote Scan driver is connecting to the e-STUDIO451c Series.

y

This cannot be set when the Remote Scan driver is connecting to the e-STUDIO452 
Series or e-STUDIO282 Series.

You can add a new connection to other equipment by searching the equipment in your network.  
This enables you to add several devices that you can connect using the Remote Scan driver.
To add a new connection, click the [Devices] menu and select [Discovery].  The TopAccessDoc-
Mon Local Discovery dialog box appears and discovers the devices in your network to add a 
new connection.  For further instruction on how to discover the devices using the TopAccess-
DocMon Local Discovery dialog box, see the following section.

After you add other devices in the connection list, you can change the target equipment by 
selecting the [Select e-STUDIO] command under the [Devices] menu.

If you have added more than one device to connect, you can change the target device for scan-
ning originals using the Remote Scan driver.