kymco mo x500 Instruction De Maintenance

     

• Note the following when replacing the halogen headlight bulb

ä  Wear clean gloves while replacing the bulb. Do not put finger prints on the headlight bulb,

as they may create hot spots on the bulb and cause it to fail.

ä  If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to

prevent its early failure.

ä  Be sure to install the dust cover after replacing the bulb.

• Check the battery condition before performing any inspection that requires proper battery

voltage.

• A continuity test can be made with the switches installed on the scooter.

• Route the wires and cables properly after servicing each component.

A halogen head light bulb becomes very hot while the head light is on, and remains for a while
after it is turned off. Be sure to let it cool down before servicing.

＊