kymco mo x500 Instruction De Maintenance

 

Remove the front cover (page 2-11)

Disconnect the headlight connector from the
headlight bulb and remove the dust cover.

Unhook the retainer and remove the bulb from
the headlight case.

Install a new bulb in the headlight case, by
aligning the bulb tab with the case groove.

Hook the retainer.

Install the dust cover properly on to the
headlight and connect the headlight connector

POSITION LIGHT
Remove the front cover (page 2-11).

Remove the bulb socket and position light bulb.
Remove the bulb and replace with a new one.

Installation is in the reverse order of removal.

Headlight Connector

            Dust Cover

A halogen headlight bulb becomes very
hot while the headlight is ON, and
remain for a while after it is turned OFF.
Be sure to let it cool down before
servicing.

＊

              Socket

     

                      Bulb

                  Retainer                                  Bulb

Avoid touching the halogen headlight
bulb. Finger prints can create hot spots
that cause a bulb to break.

＊