Emerson SAG581126000 Manuel D’Utilisation

SAG581126000 

System Application Guide 

Issue AD, November 23, 2009 

Spec. No. 581126000 (Model 700

NVBA

) 

Page 16 of 123 

 

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy 

Systems, North America, Inc.  Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited. 

♦  Provides common equipment for one “power and distribution” bay rated for up to 2000 amperes of 

distribution. 

♦  Accepts one (1) Distribution Cabinet (options are 1-Row, 2-Row, 3-Row, or 4-Row cabinet). 
♦  Accepts one (1) Meter-Control-Alarm (MCA) Assembly. 
♦  Accepts one (1) Module Mounting Assembly.  The Module Mounting Assembly can consist of one (1), two 

(2), three (3), or four (4) factory interconnected 8-position Module Mounting Shelves.  Each shelf in a 
Module Mounting Assembly provides eight (8) mounting positions for Rectifier Modules (PCUs).  When a 
Module Mounting Shelf within the Module Mounting Assembly is equipped with a DC-DC Converter 
Option Kit, the four (4) middle positions will accept either Rectifier Modules (PCUs) or +24V/-48V DC-DC 
Converter Modules. 

Cannot use a List 

 in a List 1 when List 1 is used with a List 2 

(List 21 and 22 are not provided with connection points for inter-bay busbars.) 

1)  Order a relay rack per '

' under ACCESSORY DESCRIPTIONS.  If required, order Relay Rack 

Transition Plates per '

' under ACCESSORY DESCRIPTIONS.  A ship loose option is available, as described in '

' under ACCESSORY DESCRIPTIONS. 

2)  Order one (1) List 

, or 

 Distribution Cabinet. 

3)  Order up to four (4) Distribution Bus Panels as required per '

' and the 

capacity of the Distribution Cabinet ordered. 

4)  Order one (1) List 

, or 

 MCA. 

5)  Order as required one (1) MCA Interface option per Lists 

, or 

Also order as required WinLink Software per List 

6)  Order one (1) List 

 (interface components for one (1) Module Mounting Assembly).  Order a Module 

Mounting Assembly per PD588705101/PD588705102/PD588705103/PD58805104.  List 30 is factory 
connected to the Module Mounting Assembly ordered. 

7)  Order one (1) List 

 (DC-DC Converter Option Kit) for each 8-position Module Mounting Shelf in which 

DC-DC Converters are required.  Note that some Module Mounting Assemblies consist of multiple 
8-position Module Mounting Shelves.  The kit permits the middle four (4) positions in an 8-position Module 
Mounting Shelf to accept DC-DC Converter Modules or Rectifier Modules (PCUs).  List 60 is factory 
installed within the 8-position Module Mounting Shelf.  List 60 kits will be installed starting with bottom 
8-position Module Mounting Shelf in the Module Mounting Assembly and working up. 

8)  Order Rectifier Modules (PCUs) per List 

 as required. 

9)  Order DC-DC Converter Modules per List 

 as required. 

10) Order one (1) Module Mounting Position Blank Cover Panel, 

, for each empty module 

mounting position in the system. 

11) Order fuses and/or circuit breakers, as required, per '

' under ACCESSORY 

DESCRIPTIONS. 

12) Order input and load distribution lugs, as required, per '

' under ACCESSORY 

DESCRIPTIONS.