Emerson SAG581126000 Manuel D’Utilisation

SAG581126000 

System Application Guide 

Issue AD, November 23, 2009 

Spec. No. 581126000 (Model 700

NVBA

) 

Page 20 of 123 

 

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy 

Systems, North America, Inc.  Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited. 

♦  Provides one special application Meter-Control-Alarm (MCA) 

assembly (Configuration No. 534878).  Refer to 

for a description of MCA functions. 

♦  Alarms:  Major, Minor, High Voltage #1, MCA Fail, Battery on Discharge, Very Low Voltage, AC Fail, 

Fuse/Circuit Breaker, Rectifier Module Fail.  

Only one (1) MCA per power system is required. 

Mounts in the Main Bay Distribution Cabinet. 

Cannot be ordered with 

1)  Order one (1) List 

, 12, or 

 as required per power system. 

 

♦  Provides one special application Meter-Control-Alarm (MCA) 

assembly (Configuration No. 534879).  Refer to 

for a description of MCA functions. 

♦  Alarms:  Major, Minor, Test/Equalize 2, Fuse/Circuit Breaker, Battery on Discharge, 50% Battery On 

Discharge, AC Fail, Low Voltage Disconnect, Test/Equalize 1. 

Only one (1) MCA per power system is required. 

Mounts in the Main Bay Distribution Cabinet. 

Cannot be ordered with 

1)  Order one (1) List 

, or 13 as required per power system. 

 

♦  Accepts one (1) Distribution Bus Panel. 
♦  Rated for up to 500 amperes of distribution (960 amperes when equipped 

with 

). 

♦  Available for use in 

 and 

 bays. 

♦  One (1) Quad Shunt circuit card (P/N 507431) is provided with each 

distribution cabinet.  This circuit card can monitor up to four (4) system 
distribution load shunts.  All shunt cards interface with the MCA for system 
distribution load current monitoring. 

♦  A Low Voltage Disconnect (LVD) circuit card (P/N 509477) is provided in each Distribution Cabinet that… 

¾  Contains one or more distribution rows that are equipped with a low voltage disconnect contactor, or