Tecumseh snow king oh358sa Manuel D’Utilisation
Page 4
4-Cycle • Snow King Engine
181-1275-14
III. Oil and Fuel Specifications
A. Oil
To operate engine you need to use a clean, high quality,
detergent oil. For recommended engine oil, see Table 1.
In addition, you need to be sure the oil sump contains the
correct amount of oil to operate properly. For
recommended oil sump capacity, see Table 2.
detergent oil. For recommended engine oil, see Table 1.
In addition, you need to be sure the oil sump contains the
correct amount of oil to operate properly. For
recommended oil sump capacity, see Table 2.
NOTES
Be sure original container is marked A.P.I. Service “SL/SJ”.
Using multigrade oil above 32°F (0°C) will increase oil
consumption. SAE 10W40 is NOT recommended.
consumption. SAE 10W40 is NOT recommended.
Tecumseh special-formulated oils are available at your
Authorized Tecumseh Servicing Dealer.
Authorized Tecumseh Servicing Dealer.
B. Fuel
Use unleaded regular, unleaded premium or reformulated
automotive fuel only. You may use gasoline containing the
components identified in Table 3.
automotive fuel only. You may use gasoline containing the
components identified in Table 3.
• DO NOT use leaded fuel.
• Fuel must be fresh and clean. NEVER use fuel left
• Fuel must be fresh and clean. NEVER use fuel left
over from last season or stored for long periods.
• NEVER mix oil with fuel.
• DO NOT use fuel containing Methanol
• DO NOT use fuel containing Methanol
(Wood Alcohol).
IV. Before Starting Your Engine
A. Checking Oil Level
To avoid engine damage, it is important to:
• Check oil level before each use and every 5
operating hours when engine is warm. Check oil
level more frequently during engine break-in.
level more frequently during engine break-in.
• Keep oil level between “FULL” and “ADD” marks on
oil fill cap/dipstick or to point of overflow on engines
with an oil fill cap/plug. See Figure 7.
with an oil fill cap/plug. See Figure 7.
• Be sure oil fill cap/dipstick or oil fill cap/plug is
tightened securely.
NOTES
DO NOT overfill oil filler. Doing so may result in oil carry-
over to the equipment and cause malfunction or damage.
over to the equipment and cause malfunction or damage.
DO NOT allow oil level to fall below the “ADD” mark on oil
fill cap/dipstick. Doing so may result in equipment
malfunction or damage.
fill cap/dipstick. Doing so may result in equipment
malfunction or damage.
Contact your Authorized Tecumseh Servicing Dealer for
Tecumseh Oil.
Tecumseh Oil.
Some engines are equipped with a oil fill cap/dipstick or oil
fill cap/plug (see equipment manufacturer’s instructions). To
change the oil on your engine, see "B. Changing Oil"
instructions on page 17.
fill cap/plug (see equipment manufacturer’s instructions). To
change the oil on your engine, see "B. Changing Oil"
instructions on page 17.
Table 1. Recommended Oil
Table 2. Oil Sump Capacity
Oil Sump Capacity
Engine
Ounces
U.S. Pints Liters
Model Number
21
1-1/4
.62
LH195SA/LH195SP
OH195SA/OH195SP
OH195SA/OH195SP
26
1-5/8
.77
LH318SA/LH358SA
OH318SA
OH318SA
28
1-3/4
.83
OH358SA
Table 3. Recommended Fuel
Fuel Component
Percentage
Ethanol
10%
Grain Alcohol (“Gasohol”)
10%
MTBE (Methyl Tertiary Butyl Ether)
15%
ETBE (Ethyl Tertiary Butyl Ether)
15%
Figure 7. Engine Oil Level
-20 F
O
32 F
O
32 F
O
32 F
O
40 F
O
-20 C
O
20 F
O
40 C
O
30 C
O
20 C
O
10 C
O
0 C
O
-10 C
O
-30 C
O
0 F
O
60 F
O
80 F
O
100 F
O
Straight Grade
730225A or SAE 30
Tecumseh Part No.
Multi Grade
730226A or SAE 5W30 or SAE 10
Tecumseh Part No.
Synthetic
730263 or SAE 0W30
Tecumseh Part No.
Tecumseh Recommended Oil Usage
FULL
ADD
OK
Fill Between
“FULL” and “ADD”
Marks
“FULL” and “ADD”
Marks