Tecumseh snow king oh358sa Manuel D’Utilisation

181-1275-14

Page 5

If your engine has an oil fill cap/dipstick go to step 1. If your 
engine does NOT have an oil fill cap/dipstick, see "II. Oil Fill 
Cap/Plug" instructions below.
1. Be sure engine is upright and level.
2. Unscrew oil fill cap/dipstick from oil filler tube and wipe 

dipstick clean. See Figures 8 and 9.

3. Screw oil fill cap/dipstick back into oil filler tube. Tighten 

securely.

4. Unscrew and remove oil fill cap/dipstick from oil filler 

tube. Note oil level. If oil reading on dipstick is below 
“ADD” mark, slowly add oil to reach “FULL” level. See 
Figure 7 on page 4. Afterward, continue reading 
instructions below.

5. Screw oil fill cap/dipstick back into oil filler tube. Tighten 

securely.

6. Wipe away any spilled oil.

If your engine does NOT have an oil fill cap/dipstick, go to 
step 1. If your engine has an oil fill cap/dipstick, see "I. Oil 
Fill Cap/Dipstick" instructions above.
1. Be sure engine is upright and level.
2. Clean area around oil fill cap/plug. See Figure 9.
3. Unscrew oil fill cap/plug. 
4. Add oil to overflow point, making sure to avoid spilling.
5. Screw oil fill cap/plug back into oil fill hole. Tighten 

securely. 

6. Wipe away any spilled oil.