Nilfisk scrubtec 586 Manuel D’Utilisation

SCRUBTEC R Manual Steering

  

To install the brush or pad on the BOOST machine, follow this pro-
cedure:

  1.  Turn the key switch “ON”.

  2.  Put the brush switch in the “UP” position. 

  3.  Turn the key switch “OFF”.

  4.  Go to the side of the machine.

  5.  Press on a brush or pad under the fl ex plates.  See fi gure 15.

   

NOTE:   When using a black pad, position pad on head.   
Lower head and operate momentarily to affi x pad to  
pad driver (if you have diffi culty, position pad on  
fl oor and lower head then operate.)

To remove the brush or pad from the machine, follow this proce-
dure:

1.  Turn the key switch “ON”.

2.  Put the brush switch in the “UP” position.

3.  Turn the key switch “OFF”.

4.  Go to the side of the machine.

5.  Pull downward on the brush or pad until it releases from the fl ex 

plates.  See fi gure 16.