Exegin Technologies Limited Q52 Manuel D’Utilisation
21
Q52 Installation and Configuration Guide © Exegin Technologies Limited, 2007
5. Configuring the Q52 on Your Network
Required TCP/IP Settings
Required TCP/IP Settings
Configure the Q52 IP address and subnet mask
Once the IP address has been created, you can configure the remaining TCP/IP
parameters of the Q52 ZigBee / 802.15.4 Bridge using one of the following:
parameters of the Q52 ZigBee / 802.15.4 Bridge using one of the following:
•
Q52 HTML forms,
•
the Q52 Gecko utility (Windows only),
•
the TCP/IP telnet command,
.
Using HTML
forms
forms
1. Load the Q52 HTML forms as described in
on page 17, then select
"Network" from the Main Menu.
Or, go directly to the Network Configuration form by typing the following into your
browser:
browser:
http://Q52IPaddress/tcpipConf.html
The TCP/IP Settings form is displayed (
).
Figure 5—TCP/IP Settings Form