Exegin Technologies Limited Q52 Manuel D’Utilisation
59
Q52 Installation and Configuration Guide © Exegin Technologies Limited, 2007
8. Reference Information
Complete Command Reference
Complete Command Reference
Complete Command Reference
This section outlines the entire Q52 command set including the command syntax, a
description, and in most cases, an example for each command listed. These commands
are available in the command line interface shell. See
description, and in most cases, an example for each command listed. These commands
are available in the command line interface shell. See
on page 57 for information on accessing these commands
•
•
•
•
store net mask netmask
Store the subnet mask for the Q52.
store net gateway
routerIPaddress
Store a default router/gateway for the Q52 to
forward remote packets to.
forward remote packets to.
store net opts [[-]dhcp]
Enable or disable DHCP requests for IP
addresses.
addresses.
list net
List the current TCP/IP network settings.
list sysinfo
List current system information for the Q52.
save
Save all current settings to Flash.
reset
Reset the Q52.
ping IPaddress
"
ping
" another TCP/IP host on the network.
quit
"Quit" out of the command line interface
shell.
shell.
Table 3—Common Commands
Command Syntax
Description