Exegin Technologies Limited Q53R6 Manuel D’Utilisation
47
Q53 Installation and Configuration Guide © Exegin Technologies Limited, 2013
8. Using HTML Pages to Configure the Q53
ZigBee Forms
ZigBee Forms
ZigBee Forms
ZigBee Control Form
Figure 17—Zigbee Control Form
Control
Start: Forces the Gateway device to join or form the specific network.
Leave: Forces the Gateway device to leave the network.
Permit-Join: ZigBee networks have a notion of a period of time during which a
coordinator allows devices to join its network. The Permit-Join button put the gateway
into an open state of 60 seconds (configurable on the Advanced page). During this period
child devices should be able to join the network being formed by the gateway
coordinator.
coordinator allows devices to join its network. The Permit-Join button put the gateway
into an open state of 60 seconds (configurable on the Advanced page). During this period
child devices should be able to join the network being formed by the gateway
coordinator.
Status
Refresh: Displays information regarding the gateway device and its local network.
ZigBee Configuration Form
.